COURSES - FIRE SAFETY ENGINEERING
Professional Ethics for Engineers
The American Council of Engineering Companies Ethics Guidelines
Case Studies Using the NSPE Code of Ethics
Ethics Using the Rules of Practice
Emergency Procedures for Employees with Disabilities in Office Occupancies
Petroleum Refining Processes
Modeling the Ignition of Soft Furnishing by a Cigarette
Molecular Chemistry of Inhibited Combustion Systems
The Molecular Level Design of Fire Retardants and Suppressants
Flame Retardant Mechanism of Silica
Entrainment in Flame Geometry of Fire Plumes
Entrainment and Heat Flux of Buoyant Diffusion Flames
Evaluating a Protocol for Testing Fire-Resistant Oil-Spill Containment Boom
Evaluating Incentives for Solar Heating
Evaporation and Condensation Heat Transfer Performance of Flammable Refrigerants in a Brazed Plate Heat Exchanger
The Evolution of Performance-Based Codes and Fire Safety Design Methods
Handbook for Handling, Storing, and Dispensing E85
The Impact of Thermal Imaging Camera Display Quality on Fire Fighter Task Performance
Transient Modeling of Thermal Degradation in Non-Charring Solids
Protecting Fire Fighters Exposed in Room Fires
The Reduction in Fire Hazard in Corridors and Areas Adjoining Corridors Provided by Sprinklers
Quick Response Sprinklers in Chemical Laboratories
Measurement Needs for Fire Safety
Impact of a Residential Sprinkler on the Heat Release Rate of a Christmas Tree Fire
Fire Protection System Design Using the 2003 International Building Code
Fire Endurance of Open-Web Steel-Joist Floors With Concrete Slabs and Gypsum Ceilings
Coastal Marsh Recovery and Oil Remediation after In-Situ Burning: Effects of Water Depth, Oil, and Marsh Type
Salt Marsh Recovery After In-Situ Burning for Oil Spill Remediation: Effects of Water Depth and Burn Duration
Coagulation of Smoke Aerosol in a Buoyant Plume
The Coagulation of Aerosols With Broad Initial Size Distribution
Fire Endurance Tests of Selected Residential Floor Construction
Demonstration of Biodegradable, Environmentally Safe, Non-Toxic Fire Suppression Liquids
Fire Risk Assessment for Telecommunications Central Offices
Ignition of Cellulosic Fuels by Heated and Radiative Surfaces
Fire Fighter's Protective Clothing and Thermal Environments of Structural Fire Fighting
Ignition, Flame Spread and Mass Burning Characteristics of Liquid Fuels on a Water Bed
Fire Induced Vibration Monitoring for Building Collapse
Fire Performance of an Interstitial Space Construction System
Fire Protection Foam Thermal Physical Properties
Fire-Resistance and Sound-Insulation Ratings for Walls, Partitions, and Floors
Ignition and Flame Propagation Studies Over a Flat Fuel Surface
Fire Safety Engineering in the Pursuit of Performance-based Codes
A Fire Safety Evaluation System for Board and Care Homes
Fire Safety Guidelines for Vehicles in a Downtown People Mover System
Fire Spread Along the Vertical Corner Wall
Flame Inhibition Chemistry and the Search for Additional Fire Fighting Chemicals
Flame Retardant Mechanism of the Nanotubes-based Nanocomposites
Flame Suppression Effectiveness
Buoyancy-Driven Ventilation of Hydrogen From Buildings: Laboratory Test and Model Validation
Flammability Characterization of Foam Plastics
Flammability of Oil-Based Painted Gypsum Wallboard Subjected to Fire Heat Fluxes
Flow Induced by Fire in A Compartment
Coagulation of Smoke Aerosol in a Buoyant Plume
Combustion of Oil on Water
OSHA General Safety and Health Provisions
OSHA Standards for Fire Protection
Flow Through Horizontal Vents as Related to Compartment Fire Environments
Free Space Optics Communication System Testing in Smoke and Fire Environments
Full-Scale Flammability Measures for Electronic Equipment
Gas Generator Induced Flow and Its Effect on Fire Flame Extinction
Gasification of Silicone Fluids Under External Thermal Radiation
Heterogeneous Combustion
Investigation of a Model for Upward Flame Spread: Transient Ignitor and Burning Rate Effects
Investigation of Droplet Penetrations Through Complex Openings of Compartments
Minimum Mass Flux Requirements to Suppress Burning Surfaces with Water Sprays
An Investigation of Creosoting and Fireplace Inserts
An Investigation of Oil and Gas Well Fires and Flares
Issues in Evaluation of Complex Fire Models
An Investigation of Fire Impingement of a Horizontal Ceiling
Mixing and Radiation Properties of Buoyant Luminous Flame Environments
Modeling and Experimental Validation of Pyrotechnic Gas Generators
Modeling the Ignition of Soft Furnishing by a Cigarette
Manual of Evaluation Procedure for Passive Fire Prevention Following Earthquakes
Early Detection of Room Fires Through Acoustic Emission
Effects of Sample Mounting on Flammability Properties of Intumescent Polymers
Environmental Cycling of Cellulosic Thermal Insulation and Its Influence on Fire Performance
Protecting Fire Fighters Exposed in Room Fires
Quick Response Sprinklers in Chemical Laboratories
Smoke Emission for Burning Crude Oil
Smoke Movement Through a Suspended Ceiling System
Solid Fuel Flame Spread and Mass Burning in Turbulent Flow
Soot
Fire Safety Engineering
Building Materials and Structures
The Evolution of Performance-Based Codes and Fire Safety Design Methods
An Introduction to Fire Hazard Modeling
Thermal Radiation From Large Pool Fires
Investigation into the Flammability Properties of Honeycomb Composites